Automatic Rotor Coil Winder Machinery

Model NO.: ND-LAW-5B2 Certification: ISO, CCC Function: Lubrication Condition: New Warranty: 12 Months Shaft Length: 20~60mm Commutator Diameter: 8~40mm Weight: 1200kg After-Sales Service: Overseas Service Center Available Specification: ISO Precision: Precision Heating System: No Heating Automatic Grade: Automatic Customized: Customized Stack Diameter: 3~17mm Turn Number: 0~9999 Winding Speed: 0~3000 Rpm Dimension: 2000X1300X1800 Trademark: NIDE Origin: China Rotor Coil Winder machinery is used for automatically hook type commutator armature winding, it is suitable for winding medium and big wire diameter armature. Automatic feeding, winding, indexing and wire cutting,only load and unload armature from material loader. Equipped with touch screen and PLC, winding parameter could be set and modified on the screen. We also have rotor coil winder machinery equipped with conveyor, operator only need to put several pieces of armature on the conveyor at one time, then machine will finish all the armatures automatically. Below parameter is for our standard machine, we could produce machine according to customer's armature samples accordingly.

Technical Parameter:

Item	Specification
Wire diameter	Magnetichysteresis method:0.16~0.55mm
	Electriccontrol method:0.30~0.85mm
Armature O.D range	20~60mm
Stack diameter	3~17mm
Shaft length	20~60mm
Shaft length	Less than 300mm
Armature slot	Even slot
Turn number	0~9999
Commutator diameter	8~40mm
Winding speed	0~3000 rpm
Winding motor power	1.5KW * 2
Angle detecting speed	0~3000 rpm
Angle detecting motor power	0.75KW *1
Air supply pressure	4~6 Kg/cm2
The machine total power	4000 W
Voltage	Three phase AC380V 50/60Hz
Weight	1200Kg
Dimension	2000(L)X1300(W)X1800(H)mm

Main Configuration:
Indexing servo motor: 750WX1 spindle: Omron
Winding servo motor 1500WX2 spindle: Omron
PLC: Omron
Interface module: Omron
Extension module: Omron
Relay: Omron
Proximity: AUTONICS
Touch screen: 7", WEINVIEW
Air switch: MITSUBISHI
Combined power source double loop: NIDE
Power Switch: MINGWEI
Circuit breaker: DELIXI
Indicator and button: SCHNEIDER
Ball bearing: UBC(USAbrand)
Sliding bearing: MISUMI (Japanbrand)
Transmission linear guide: ABBA or Shangying or CPC
Working plate: 80mm thick nodular cast iron
Winding transmission base: nodular cast iron
Indexing transmission base: nodular cast iron
Winding flyer: aluminium die-cast alloy, double spindle balancing adjustment (easy for disassembling)
Indexing spindle: 4 section standard
Winding tooling: fast changing without tools, integral quenching HRC60-62
Buffer(small): CKD (Japanbrand)
Buffer(big): AIRTAC
Cylinder: AIRTAC
Air source treatment elements: SMC
Electromagnetic valve: SMC
Tensioner: MITSUBISHI electric magnetic powder tensioner (wire diameter range: ¢0.3~¢1.2mm)
Or WANNER (Switzerland brand) magnetic tensioner(wire diameter range: ¢0.2~¢0.45mm)
Or HMT-04 (Hangzhou Puwei) magnetic tensioner(wire diameter range: ¢0.2~¢0.45mm)
 
Feature:
Three winding mode: single slot-single hook, single slot-double hook and double layer winding. It could do twice winding in one slot, four times winding in the two adjacent slots. It has automatic treatment for wire broken, 2 settable sequences is: winding before broken, or broken before winding.
Production parameter for 100nos armatures could be stored
Display parameter, including shift output, total output, consuming time, etc.
Automatic alarm if any abnormal condition occurs
Single action, automatic and stepping operation could be switched
Steady fixture, up and bottom protective tooling and protective wire hooking device
Loading mode: cylinder feeding armature automatically, get out finished armatures manually

Contact us if you need more details on Coil Winder. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Winder Machinery、Automatic Winder. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Armature Winding Line > Armature Winding Machine