Stator Electrostatic Powder Coating Equipment
Basic Info
Model No.: ND-XQTF-5
Product Description
Model NO.: ND-XQTF-5 Coating: Powder Coating Certification: ISO Stator Coating: Powder Coating Color: Ral9010 or as Per Customer Requirement Certificate: CCC Origin: China Type: Coating Production Line Substrate: Steel Condition: New Function: Powder Stator Coils Size: Middle Size Trademark: NIDE Power Coating Machine composition:
(1) XQTF-5 Coil Powder Coating Machine: 1set, including:
1.1 Machine mainframe 1set Outline dimension:L1253×W1300(include powder cleaning room 500mm) xH2100mm The room body manufactured by 1.2mm A3 cold rolled plate. 1.2 DC electrical heating device: 1set Heating power(0~10KW, clearance working way)adjustable,it can set heating time. 1.3 Pneumatic rise and decline device 1 set
1.4 Fluidized bed coating device: 1set
All PVC plate manufacture, with detachable air chamber and micro-hole sheet.
1.5 .Powder vibration device 1set
1.6. First step pulse recycling in the back 1set, with 2pcs filter element and pulse auto back flushingfunction, it can clean the powder in the filter element automatically without turning off the machine, with 1 set powder-blowing gun.
1.7 The coating room doorway install photo-electricity protection(raster)device, this keep the user saver when operating.
1.8 The machine has count function.
(1) Powder secondary recycling machine(outline dimension L830×W830×H1700mm): 1 set
(2) Use 25 type pulse back flushing filter element way recycling machine, motor power 2.2KW.
Working process:
(1) Load the coil (1pc) to the sling fitting and insert each wire head(heated) into the connection groove, compact inching cylinder.
(2)Turn on the switch (go up and down, heating, coating etc controlled by time relay to work automatically)
(3) After finish coating (the powder adhere to the stator coil and through melting and leveling preliminary, there's a little powder in the inside and outside of the stator lamination, but not melt, it can clean completely by preliminary air blowing and subsequent cleaning).Take it down and transmit toanother person, clean the inside and outside of the stator with air blowing gun in the powder cleaning entrance, then put it on the shelf (prepared by customer) for natural cooling -- put into oven together for baking (prepared by customer, the bake requirement of the powder in the oven is the oven temperature rise to the needed temperature for curing powder(this depend on the enameled wire heat- resisting temperature and powder curing requirement), keep hot insulation for over 40 minutes).
Stators powdered by this machine
Electric requirement: (1)Electricity: 380V±10%, 50HZ. Electricity supply way: three phase four wire system. (2)Compressed air: 0.6Mpa containing oil:≤0.1ppm containing water: ≤ 1.3g/m3
Contact us if you need more details on Painting Machine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Coating Machine、Powder Coating Machine. If these products fail to match your need, please contact us and we would like to provide relevant information.
(1) XQTF-5 Coil Powder Coating Machine: 1set, including:
1.1 Machine mainframe 1set Outline dimension:L1253×W1300(include powder cleaning room 500mm) xH2100mm The room body manufactured by 1.2mm A3 cold rolled plate. 1.2 DC electrical heating device: 1set Heating power(0~10KW, clearance working way)adjustable,it can set heating time. 1.3 Pneumatic rise and decline device 1 set
1.4 Fluidized bed coating device: 1set
All PVC plate manufacture, with detachable air chamber and micro-hole sheet.
1.5 .Powder vibration device 1set
1.6. First step pulse recycling in the back 1set, with 2pcs filter element and pulse auto back flushingfunction, it can clean the powder in the filter element automatically without turning off the machine, with 1 set powder-blowing gun.
1.7 The coating room doorway install photo-electricity protection(raster)device, this keep the user saver when operating.
1.8 The machine has count function.
(1) Powder secondary recycling machine(outline dimension L830×W830×H1700mm): 1 set
(2) Use 25 type pulse back flushing filter element way recycling machine, motor power 2.2KW.
Working process:
(1) Load the coil (1pc) to the sling fitting and insert each wire head(heated) into the connection groove, compact inching cylinder.
(2)Turn on the switch (go up and down, heating, coating etc controlled by time relay to work automatically)
(3) After finish coating (the powder adhere to the stator coil and through melting and leveling preliminary, there's a little powder in the inside and outside of the stator lamination, but not melt, it can clean completely by preliminary air blowing and subsequent cleaning).Take it down and transmit toanother person, clean the inside and outside of the stator with air blowing gun in the powder cleaning entrance, then put it on the shelf (prepared by customer) for natural cooling -- put into oven together for baking (prepared by customer, the bake requirement of the powder in the oven is the oven temperature rise to the needed temperature for curing powder(this depend on the enameled wire heat- resisting temperature and powder curing requirement), keep hot insulation for over 40 minutes).
Stators powdered by this machine
Electric requirement: (1)Electricity: 380V±10%, 50HZ. Electricity supply way: three phase four wire system. (2)Compressed air: 0.6Mpa containing oil:≤0.1ppm containing water: ≤ 1.3g/m3
No | Name | Design parameter | Remark |
1 | Workpiece name | Motor stator coil | |
2 | Workpiece material | Enameled wire | |
3 | Workpiece Dimension | Stator lamination diameter<Φ95mm stator lamination thickness(includecoil height)<100mm Max | |
4 | Workpiece weight | <3 Kg Max/pc | |
5 | Output | 120~180pcs/h | This output means the machine working ability; it depends on the powder characteristic. |
6 | Working hours | Decide by customer |
Product Categories : Stator Winding Line > Insulation Treatment Machine
Premium Related Products
Other Products
Hot Products
LED Light LED Bulb Manufacturing Machines Production LineMotor Shaft Automatic Feeding Machine Shaft Production MachineAutomatic Armature Turning MachineGenerator Motor Stator Insulation Paper Insertion MachineFull Automatic Magnetic Field Coil Winding Shaping MachineStator Varnish Dipping Machine for Stator Insulation TreatmentAutomatic Generator Armature Motor Rotor Balancing Machine with Five StationsArmature Insulation Paper Inserting Machine for DC Motor, Wiper MotorAutomatic Armature Commutator Hook Hot-Stacking MachineHigh Effeciency Fully Automatic Four Working Stations Stator Coil Lacing MachineAutomatic Induction Motor Stator Coil Winding Insertion MachineAutomatic Rotor Coil Winder MachineryEight Working Station Coil Winding MachineBLDC Stator Needle Winding MachineAutomatic Motor Armature Production Machine Assembly LineMotor Stator Automatic Production Assembly Machine (line)