Horizontal Type Pump Motor Stator Automatic Coils Forming Machine
Basic Info
Model No.: Z2XW1-600/160
Product Description
Model NO.: Z2XW1-600/160 Automation Type: Full Automation Weight: 2000kg Drive Method: Huralic Oil Machine Size: Middle Size Trademark: NIDE Origin: China Stator Diameter: 0~300mm Pitch Time: ≤30s/PC Power Supply: 380V 50/60Hz Condition: New After-Sales Service: Overseas Service Center Available Specification: customized HS Code: 8479819000 Horizontal type pump motor stator automatic coils Forming Machine
This type middle forming machine adopts a horizontal structure, suitable for big power,big dimension, heavy weight, long stack length stators. The stator should be loaded and unloaded manually directly. The series opens the stator bore and as an option pushes back the wedges and preforms the winding head. With a touch screen in control, this forming machine is of high automation. And all stator forming parameter can be set in the touch.
Application
It is applied to deep water pump motor and other various type of big dimension stator.
Main technical data
Information needed for forming machine inquiry
It will be better if customer could send us detailed drawing including below information.
1. Stator lamination drawing
2. Stator stack drawing
3. Stato winding drawing
4.Required productivity
5. Other technical requirement
If possible, it will be better if customer can send us samples.
Appropriate use
If coil dimension and appearance is inaccurate, stop to do adjustment to avoid of quality accident.
Check and clean up the electrical cabinet once every three months.
The machine should be stopped or power should be off when the operator is away or do clean and lubricating job.
Do not remove the safety protection device in the process of using.
The dress of operator should meet the safety requirements, stand in proper position.
Regularly clean the lubricating tooling and lubricating system. Do not keep the safety door and oil eye lid to avoid of that foreign matter like dust,metal scrap get in.
Do not operate machine during its maintenance, stop running machine and cut off the power.
That other than specified personnel do not operate the machine, and two people operate the machine at the same time is forbidden.
It is prohibited that operate machine and touch the electrical parts by wet hands, probably may cause electric shock.
The operator can not leave away when the machine is running, should keep his eyes on that if any abnormality (abnormal noise, unusual smell, over heat, vibration) of each parts coming up. Stop and check the machine immediately if any of above mentioned takes place, and solve it in time.
It is prohibited that to use the machine beyond its capacity and load.
After stop using the machine, please do the check an clean up, please do not use the steam or water or corrosive liquid to clean the machine.
The height of the hydraulic oil in the oil tank should keep in same level with the mark line; the hydraulic oil no is J-HM46# antiwar hydraulic oil. Contact us if you need more details on Coil Forming Machine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Stator Forming Machine、Forming Machine. If these products fail to match your need, please contact us and we would like to provide relevant information.
This type middle forming machine adopts a horizontal structure, suitable for big power,big dimension, heavy weight, long stack length stators. The stator should be loaded and unloaded manually directly. The series opens the stator bore and as an option pushes back the wedges and preforms the winding head. With a touch screen in control, this forming machine is of high automation. And all stator forming parameter can be set in the touch.
Application
It is applied to deep water pump motor and other various type of big dimension stator.
Main technical data
| Stator OD | ≤300mm |
| Stator ID | ≤200mm |
| Stack Height | ≤400mm |
| Height of Coil | ≤70mm |
| Pitch time | ≤30s/pc |
| Displacement of Cylinder | 50L/min |
| Power supply | 380V 50/60Hz 4Kw |
| Weight | ≈2500Kg |
| Dimension | (L)4400×(W)1850×(H)1350mm |
Information needed for forming machine inquiry
It will be better if customer could send us detailed drawing including below information.
1. Stator lamination drawing
2. Stator stack drawing
3. Stato winding drawing
4.Required productivity
5. Other technical requirement
If possible, it will be better if customer can send us samples.
Appropriate use
If coil dimension and appearance is inaccurate, stop to do adjustment to avoid of quality accident.
Check and clean up the electrical cabinet once every three months.
The machine should be stopped or power should be off when the operator is away or do clean and lubricating job.
Do not remove the safety protection device in the process of using.
The dress of operator should meet the safety requirements, stand in proper position.
Regularly clean the lubricating tooling and lubricating system. Do not keep the safety door and oil eye lid to avoid of that foreign matter like dust,metal scrap get in.
Do not operate machine during its maintenance, stop running machine and cut off the power.
That other than specified personnel do not operate the machine, and two people operate the machine at the same time is forbidden.
It is prohibited that operate machine and touch the electrical parts by wet hands, probably may cause electric shock.
The operator can not leave away when the machine is running, should keep his eyes on that if any abnormality (abnormal noise, unusual smell, over heat, vibration) of each parts coming up. Stop and check the machine immediately if any of above mentioned takes place, and solve it in time.
It is prohibited that to use the machine beyond its capacity and load.
After stop using the machine, please do the check an clean up, please do not use the steam or water or corrosive liquid to clean the machine.
The height of the hydraulic oil in the oil tank should keep in same level with the mark line; the hydraulic oil no is J-HM46# antiwar hydraulic oil. Contact us if you need more details on Coil Forming Machine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Stator Forming Machine、Forming Machine. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Stator Winding Line > Lacing and Forming Machine
Premium Related Products
Other Products
Hot Products
LED Light LED Bulb Manufacturing Machines Production LineMotor Shaft Automatic Feeding Machine Shaft Production MachineAutomatic Armature Turning MachineGenerator Motor Stator Insulation Paper Insertion MachineFull Automatic Magnetic Field Coil Winding Shaping MachineStator Varnish Dipping Machine for Stator Insulation TreatmentAutomatic Generator Armature Motor Rotor Balancing Machine with Five StationsArmature Insulation Paper Inserting Machine for DC Motor, Wiper MotorAutomatic Armature Commutator Hook Hot-Stacking MachineHigh Effeciency Fully Automatic Four Working Stations Stator Coil Lacing MachineAutomatic Induction Motor Stator Coil Winding Insertion MachineAutomatic Rotor Coil Winder MachineryEight Working Station Coil Winding MachineBLDC Stator Needle Winding MachineAutomatic Motor Armature Production Machine Assembly LineMotor Stator Automatic Production Assembly Machine (line)