Stator Coil Winding Shaping and Final Forming Machine

Model NO.: Z3XL1-150/160


Coils Shaping: Stator Forming


Stator I.D: 80~120mm


Stack Height: 20~160mm


Power Supply: 380V/50/60Hz 1.5kw


Dimension: 1600*1000*2300mm


Specification: Customized


HS Code: 8479819000




Condition: New


Vertical Shaping: Stator Shaping


Stator O.D: Max 200mm


Displacement of Cylinder: 20L


Weight: 1000kg


Trademark: NIDE


Origin: China


Stator coil winding shaping and final Forming Machine

This type of coil winding shaping machine is PLC programming, driven by hydraulic system. The design of tooling is based on the flexible principles of inner expansion. Outer wrapping and edge forming to form stator winding. This forming machine is consist of machine framework, oil hydraulic power system, control system, and forming tooling system.



Technical parameter:

Item	Unit	Data
Size	mm	(L)650×(W)950×(H)2300
Tooling included weight	kg	Around 700
Power supply		380V/50Hz three phase four wire power
Working pitch time	S/PC	≤13
ID	mm	Φ30~Φ120
OD	mm	Φ50~Φ160
Stack height	mm	15~160
Tooling stroke	mm	≤70

Machine operation steps

1. After connected to the power source and air source, switch the button to on. Press hydraulic start button; switch to auto mode.

3. Press "reset" button. Check if all parts are in the correct position.

4. Put stator into the groove. Press "Start" button by two hands. Machine will auto form.



Note: there are two triangle blocks (diagonal line) in the groove. The two holes on the stator should be aligned to the two triangle blocks separately.



Electric switch and indicator details

Name	Function	Location
Power indicator	General power indicator(On: twinkle/Off: Dark )	Electrical cabinet front
Power	Machine general power switch	Electrical cabinet front
Hydraulic start	Hydraulic system general switch	Electrical cabinet front
Reset	All action return to origin	Electrical cabinet front
Upper mould up down	Rise or lower the tooling	Electrical cabinet front
Auto/Manual	Switch over auto and manual condition of machine	Electrical cabinet front
Grating protection	Protect operator when machine is running	Front baffle pillar
Start	Cycle start button, need to be used with 9 together	Button box
Start	Cycle start button, need to be used with 8 together	Button box
Emergency stop	Separate brake	Button box
Emergency stop	Separate brake	Button box

Contact us if you need more details on Forming Machine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Winding Forming Machine、Stator Forming Machine. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Stator Winding Line > Lacing and Forming Machine