Automatic Stator Final Forming Machine with Protector

Model NO.: Z3XJ1-200/210


Coils Shaping: Stator Forming


Stator I.D: 80~120mm


Stack Height: 20~160mm


Power Supply: 380V/50/60Hz 1.5kw


Dimension: 1600*1000*2300mm


Specification: Customized


HS Code: 8479819000




Condition: New


Vertical Shaping: Stator Shaping


Stator O.D: Max 200mm


Displacement of Cylinder: 20L


Weight: 1000kg


Trademark: NIDE


Origin: China


This machine is has a wide application range. It is CE proved. With the hydraulic system and PLC programming, this machine can do forming process automaticlly. The forming for external of coil adopts sliding block folding to restrict the diameter, while the inner block to make the internal coil diameter reach requirement. The head coil forming will be processed after the forming of internal and external of coil completed.





Technical parameter:

Stator O.D	less than 160mm
Stator I.D	30~110mm
Stack height	20~150mm
Displacement of cylinder	20L
Power supply	1500 W
Voltage	380V/50/60Hz
Weight	700KG
Dimension	L850*W1000*H2300mm

Machine main function and characteristic

1. This machine adopts whole hydraulic system and PCL program.

2. This machine can adjust the forming stack length by changing washer.

3. Both slot paper and wedge should not be damaged or turned over. The stator should not be deformation or stator lamination should not be upward. There is no wire enamel broken.

4. Production capacity ≤13s/set (exclude loading/unloading time)

5. Primary qualification rate ≥99.5%, after rework, the rate ≥99.9%

6. This machine adopts safety grating protection system. Operator need to stand when operating.

7. Machine adopts two hands simultaneously start button to ensure safety.

8. Primary qualification rate ≥98.5%, after rework, the rate ≥99.5%

9. His machine adopts safety grating protection system. Operator need to stand when operating.

l0.Machine adopts two hands simultaneously start button to ensure safety.



Machine maintenance

When doing maintenance, please stop machine running and cut off the power. During machine adjustment or maintenance, please do not disassemble machine or change the mechanical and electrical system elements at random.



Daily maintenance

Each time before using, check mechanical, electrical, hydraulic, pneumatic and lubricating parts.

After work finished, clean up machine and reset machine to make all the parts to go back to original position.



Regular maintenance

Regularly check if there is water in the filter. If yes, discharge the water.

Regularly check if there is sufficient oil in the atomized lubricator. If not, replenish it.

Regularly check the lubricating condition of guide mechanism, replenish if necessary.

Check and clean up the electrical cabinet once every three months.

Check solenoid valve screws and pipe connectors once every 3 months.

Check filter once every 2 months.

Contact us if you need more details on Forming Machine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Winding Forming Machine、Stator Forming Machine. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Stator Winding Line > Lacing and Forming Machine