Precision Ultrasonic Metal Welding Machine

Precision Ultrasonic Metal Welding Machine

Product features:

• Automatic frequency recovery function, no air - cooled PLL automatic balance circuit
• Automatic detection function and alarm display of faulty mechanical module
• The amplitude of stage 5 is adjustable. Different plastics can be welded without changing the amplifier
• PLC control mode, welding time accuracy up to 0.001 seconds
• Five humanized welding methods

Installation and commissioning:

1. The welder should be placed on a solid, horizontal work table.More than 150MM space should be left behind the machine to facilitate ventilation and heat dissipation

2. To ensure safe operation, the machine must be reliably grounded and the resistance to the ground must be less than 4 ohms

3. Insert both ends of the control wire into the rear tripod socket of the welder respectively and tighten the nut

4. Put the selection switch in the manual position

5. Lock the four screws to fix the ultrasonic vibration head, but do not overexert yourself to avoid sliding teeth

6. Clean the contact surface between welding die and ultrasonic vibration head, engage with screws, and use a random special spanner to lock, with a locking force distance of 25 newtons/m

7. Connect the air pipe of the external air source to the air filter of the welding machine

Contact us if you need more details on Ultrasonic Metal Welding Machine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Precision Metal Welding Machine、Small Types of Welding Machines. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Ultrasonic Plastic Welder > Servo Ultrasonic Welding Machine