Chinese tube production machine/tube roll forming mill line

Chinese tube production machine/tube roll forming mill line

Basic information of welded pipe Roll Forming Machine:

1. Round Pipe diameter: Φ38 –Φ102mm

Pipe Thickness: 1.0 – 5.0mm

2. Square Pipe: 20X20mm – 80X80mm

Rectangle Pipe: 20X30mm – 60X80mm

Pipe Thickness: 1.0 – 3.0mm

3. Pipe Length: 6.0m – 12.0m

4. Length Tolerance: 0-6mm

The mill is intended for manufacturing of round pipe of Φ38mm-Φ102mm with thickness of 1.0mm–3.0mm from cold-rolled and hot-rolled coil strip by means of unclosed tubular blank with its subsequent welding into tube, edge heating by means of solid state high-frequency welder, Longitudinal Seam Welding in rolls of tube Welding Machine, cooling, further sizing or shaping and on-stream cutting of endless tube in measured lengths. Finished product will be of round, square or rectangular pipe.

Specification of steel pipe machine :

SteelTape Specification
1. Material: Low Carbon steel (σb≤500Mpa,σs≤235Mpa)
2. Steel Tape: Inner diameter: Φ470-Φ510mm
Outer diameter: Φmax=1500mm
Strip steel width: 40mm-240mm
The maximum weight: 2.0 tons

c) Electricity
1. Dynamic power: AC380V±10%, 3phases, 50Hz±1.0%
2. Control Power: AC220V±10%, one phase, 50 Hz ±1.0%
d) Electric installed capacity: appro. 250KW
e) Cooling water
1. Reservoir for High Frequency equipment: 15 m³, one set
2. Reservoir for circulating cooling water: 15 m³, one set

IV. Equipment makeup and main parameters of single unit:
1. Double-head un-coiler
1.1. Briefing: Rotary type to change coils easily, with a pneumatic brake
1.2. Parameters:
- Coil width: max.240mm
- Coil OD: max. Ø1500mm
- Coil ID: Ø 470- Ø 510mm
- Coil weight: max. 2.0 tons

4.1.2 Welding pipe machine Forming mill consists of:
- Driven stand: 7 sets (Horizontal)
- Driven stand shaft: Ø60mm
- Material of shaft: 40Cr
- Side roll stand: 8 sets(Vertical)
- Side roll stand shaft: Ø40mm
- Material of shaft: 40Cr
- Gear box & universal joint: 7 sets
- Material of gear box: cast steel
- Material of gear: 20CrMnTi
- Main motor: 55kW model: Z4-200-31 1 set
- Main redactor: ZLY224 1 set

4.2 Sizing mill gear box, universal joint
4.2.1 Sizing mill consist of:
- Driven stand: 5 sets (Horizontal)
- Driven stand shaft: Ø60mm
- Material of shaft: 40Cr
- Side roll stand: 5 sets(Vertical)
- Side roll stand shaft: Ø40mm
- Material of shaft: 40Cr
- Gear box & universal joint: 5 sets
- Material of gear box: cast steel
- Material of gear: 20CrMnTi
- Main motor: 55kW Model: Z4-200-31 1 set
- Main redactor: ZLY224 1 set
- 2 sets single head Turk`s head, with 4 rollers*2sets
- One speed testing roller with air cylinder for CNC flying saw

Contact us if you need more details on Chinese Tube Production Machine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Pipe Making Machine、Tube Roll Forming Mill Line. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Welded Tube Mill > Welded Pipe Machine