Automatic Generator Armature Motor Rotor Balancing Machine with Five Stations
Basic Info
Model No.: ND-BFZSZ-5L-A
Product Description
Model NO.: ND-BFZSZ-5L-A Armature Diameter: 80~115mm Dimension: 200 X 1700 X 1800 mm After-Sales Service: Overseas Service Center Available Trademark: NIDE Origin: China Working Station: 5 Station Balancing Speed: 1500-2200rpm Air Supply: 0.4~0.6MPa Color: Ral9010 or as Per Customer Requirement Specification: customized Automatic Generator Armature Motor Rotor Balancing Machine with Five Stations
Description:
For this type of Five station Armature Balancing Machine, armature does not need to mark, directly put on the conveyor, there are 5 working stations: loading and unloading station, initial measuring station, left side cutting station, right side cutting station and remeasuring station. High efficiency and precision.PLC controlled, all the data can be set on the touch screen.
Machine consist by idle station (station0), initial test station (station1), commutator end processing work bench (station 2), shaft end processing work bench (station3) and retest station (station 4) such five station in total. Besides, it is also include five machine hands,transportation line,drilling main shaft and dividing devices.
Technical Parameter
The procedure of single circle runs as following:
Transportation line take generator armature to idle station (station 0);
Machine hands transport it from idle to initial test station (station 1) to measuring original unbalance mass, positioning the right place and depth before process.
Machine hands move armature to next station (station 2) in order to process imbalance amount of commutator end.
Machine hands move generator armature to next station (station 3) in order to process imbalance amount of shaft end. Before that, machine hand will turn 180 degrees of armature to lead shaft end out towards.
Machine hands move product to retest station (station 4), measuring the permissible residual unbalance. Before that, machine hand will turn 180 degrees of armature to lead shaft end inner towards.
Machine hands move product back to original station (station 0), while the armature is qualified after test, machine will pick up next one from idle station to start another round processing, good one will come back to transportation line. If the result is not within permissible residual unbalance, system command the machine come back to the first stage and restart a copy. There are five stations in this machine, so it is possible to process five pieces in the mean time.
Production Cycle time:
The way of process is radial drilling method, use F6~ 8 driller; the cycle time 25 to 30 seconds per unit in condition of initial unbalance amount within 300gmm.
Armature balancing machine
Contact us if you need more details on Balancer. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Balancing Machinery、Balancing Device. If these products fail to match your need, please contact us and we would like to provide relevant information.
Description:
For this type of Five station Armature Balancing Machine, armature does not need to mark, directly put on the conveyor, there are 5 working stations: loading and unloading station, initial measuring station, left side cutting station, right side cutting station and remeasuring station. High efficiency and precision.PLC controlled, all the data can be set on the touch screen.
Machine consist by idle station (station0), initial test station (station1), commutator end processing work bench (station 2), shaft end processing work bench (station3) and retest station (station 4) such five station in total. Besides, it is also include five machine hands,transportation line,drilling main shaft and dividing devices.
Technical Parameter
| Items | Details |
| Type | Five-station generator auto-balancing machine |
| Main components configuration | Cylinder: SMC Servo motor: Mitsubishi Sensor: KEYENCE,OMRON,CONTRINEX LCD touch screen: KEYENCE Control PLC: KEYENCE KV-3000 Stepping motor: Oriental Motor |
| Armature Diameter | Stack height: 30-100mm Armature diameter: Φ80~115 |
| Balancing speed | 1500-2200rpm |
| Milling method | Drilling |
| Power | AC380V |
| Air supply | 0.4~0.6Mpa |
| Initial unbalance | |
| Cycle time | 25-30s |
| Residual unbalance eccentricity | Better than the national standard for Grade 6.3 |
| Volume (length x width x height) | 2200 x 1700 x 1800 mm |
The procedure of single circle runs as following:
Transportation line take generator armature to idle station (station 0);
Machine hands transport it from idle to initial test station (station 1) to measuring original unbalance mass, positioning the right place and depth before process.
Machine hands move armature to next station (station 2) in order to process imbalance amount of commutator end.
Machine hands move generator armature to next station (station 3) in order to process imbalance amount of shaft end. Before that, machine hand will turn 180 degrees of armature to lead shaft end out towards.
Machine hands move product to retest station (station 4), measuring the permissible residual unbalance. Before that, machine hand will turn 180 degrees of armature to lead shaft end inner towards.
Machine hands move product back to original station (station 0), while the armature is qualified after test, machine will pick up next one from idle station to start another round processing, good one will come back to transportation line. If the result is not within permissible residual unbalance, system command the machine come back to the first stage and restart a copy. There are five stations in this machine, so it is possible to process five pieces in the mean time.
Production Cycle time:
The way of process is radial drilling method, use F6~ 8 driller; the cycle time 25 to 30 seconds per unit in condition of initial unbalance amount within 300gmm.
Armature balancing machine
Contact us if you need more details on Balancer. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Balancing Machinery、Balancing Device. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Armature Winding Line > Other Machine
Other Products
Hot Products
LED Light LED Bulb Manufacturing Machines Production LineMotor Shaft Automatic Feeding Machine Shaft Production MachineAutomatic Armature Turning MachineGenerator Motor Stator Insulation Paper Insertion MachineFull Automatic Magnetic Field Coil Winding Shaping MachineStator Varnish Dipping Machine for Stator Insulation TreatmentAutomatic Generator Armature Motor Rotor Balancing Machine with Five StationsArmature Insulation Paper Inserting Machine for DC Motor, Wiper MotorAutomatic Armature Commutator Hook Hot-Stacking MachineHigh Effeciency Fully Automatic Four Working Stations Stator Coil Lacing MachineAutomatic Induction Motor Stator Coil Winding Insertion MachineAutomatic Rotor Coil Winder MachineryEight Working Station Coil Winding MachineBLDC Stator Needle Winding MachineAutomatic Motor Armature Production Machine Assembly LineMotor Stator Automatic Production Assembly Machine (line)